General Instructions And Tips; Battery Check; Battery Life; Power Supply - Alecto DBX-68 Mode D'emploi

7 GENERAL INSTRUCTIONS AND TIPS

7.1 BATTERY CHECK:

The display indicates the battery capacity.
battery full
battery 2/3 full
battery almost empty
place it onto the charger as soon as possible to recharge the
battery
(and flashing): battery is basically exhausted and the unit
can switch off any moment
As soon as the battery of the parent unit or baby unit becomes
exhausted, the symbol will flash in the display, the warning "WEAK
BATTERY" will appear and the unit will emit beep tones. You can turn
these beep tones off by briefly pressing the button.
The battery indication will scroll
batteries of the parent unit are being charged.
In additon to its own battery capacity, the parent unit also shows the
battery capacity of the baby unit
baby unit batterij indication
parent unit batterij indication
- - - while the

7.2 BATTERY LIFE:

With a fully charged battery pack, the baby monitor can function for 12
to 20 hours.
The times mentioned are approximates and depend on the settings and
use (how high the volume is set, whether the nightlight is enabled, how
often and for how long the baby is crying, whether the backlighting is
often enabled, what the intensity setting is, the quality of the batteries,
etc.)

7.3 POWER SUPPLY:

Adaptors:
When using adaptors, only use the supplied adaptors. Connecting
power adaptors other than the supplied adaptors can cause damage to
the electronics of the baby intercom.
Batteries:
In the DBX-68 you may only install a OPLAADBARE battery pack of the
type Lithium-Polymeer, voltage 3.7V, power 720mAh.

7.4 APRS (variable transmission power):

The DBX-68 is provided with the APRS transmission system. This
Automatic Power Reduction System monitors the transmitting power
at which the parent unit and baby unit exchange signals, ensuring a
minimum in transmission power while maintaining a 100% reliable
signal transfer.
This means that the baby unit will never transmit with more power than
what is required for a good connection.

7.5 MAINTENANCE:

Only clean the baby monitor with a moist cloth; never use chemical
cleaners. Before any cleaning, you must disconnect the adapters.
Before cleaning, any connected power adaptors must be disconnected.
48