Delay Time - Pro-Point Red Serie Mode D'emploi

8819914 'Red Line' Variable Shade Auto-Darkening Welding Helmet
SHADE NUMBER SELECTION
Shading Number can be manually set from Shade Number 9 to 13
with the control knob (#B5). Adjust the welding helmet's Shade
Number to match the type of welding. Consult the Welding Shade
Guide to determine the minimum shade for the amperage and
welding method being employed (Appendix A).

DELAY TIME

Delay time refers to the time the cartridge filter is set to change
from the dark to bright state after welding stops. The delay can
be adjusted (#B1) up to a one second delay.
1. The minimum delay is set between 0.1 to 0.25 seconds,
suitable for spot or short welds.
2. The maximum delay time is set between 0.85 to 1.0 second,
suitable for heavy current welding or when visible light is
produced.
3. Selections between minimum and maximum are suitable to
most indoor and outdoor welding operations.
SENSITIVITY
The sensitivity control (#B2) is set according to the welding
process and ambient light.
1. Low Setting - suitable for high amperage welding and
welding in areas with high levels of natural sunlight.
2. Medium Setting - suitable for most indoors and outdoors
welding.
3. High Setting - suitable for low amperage welding and welding
in areas with low light conditions, especially for low amperage
argon-arc welding.
8 For technical questions call 1-800-665-8685
V1.1