Unfolding Steps; Operation; Introduction In Handlebar Parts - e-TWOW S2 BOOSTER Manuel D'instructions

Unfolding steps

1. Press the rear brake fender in the direction of the arrow, as shown in figure
(a), until the folding hook is released from the opening located on the rear
brake. Then, lift the handlebar until it reaches the normal position and the
locking bolt comes into place, like in figure (b).
2. Raise the two handles of the handlebar until they automatically return to the
normal position, figure (c).
3. Push the lock lever in the direction of the arrow in figure (d) and lift the
handlebars to the desired height. Now press the button shown in figure (e)
and secure it in one of the two holes, as desired. Then close the lock lever
and make sure that you always keep the lever secured and tightly closed.
a

1. Introduction in handlebar parts

7
1. Thumb accelerator
2. Switch button
3. Settings button
4. On/Off light button
b c

OPERATION

5 4
3 2
7
Push
d
1
5. Horn button
6. Handlebar
7. Thumb electronic magnetic brake
Press
e
6
ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY