Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts; Adjusting The Sound Quality - Toshiba ColorStream 27A34 Mode D'emploi

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.

Selecting stereo/SAP broadcasts

You can listen to high-fidelity stereo sound with the Multi-channel TV
Sound (MTS) feature. MTS can also transmit a second audio program
(SAP) containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available in the VIDEO mode.
You can leave your TV in STEREO mode because it will automatically
output stereo or monaural sound, depending on the broadcast type. If
the stereo sound is noisy, select MONO to reduce the noise. The word
STEREO or SAP is displayed in light blue when the TV receives the
signal.
To select the desired MTS setting:
Repeatedly press the MTS button to select either STEREO, SAP,
MONO + SAP, or MONO. If the current program is not available in
stereo or SAP, the setting will not be available when you press the
MTS button.

Adjusting the sound quality

You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press
CH
PICTURE AUDIO SETUP
BASS
TREBLE
BALANCE
SURROUND
STABLE SOUND
SELECT
2. Press or
3. Press or
CH
PICTURE AUDIO SETUP
BASS
TREBLE
BALANCE
SURROUND
STABLE SOUND
SELECT
• makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
3N42501B[E] (P26-BACK) 26
or until the AUDIO menu appears.
OPTION
32
32
0
OFF
OFF
ADJUST
to highlight the item you want to adjust.
to adjust the level.
OPTION
32
32
0
OFF
OFF
ADJUST
STEREO+SAP broadcasting
STEREO
MONO
Note:
To reset the audio adjustments to the factory
settings, press RESET.
26
24/2/04, 10:57 AM
Recall
Mute
MTS
SAP
MONO + SAP
Menu
Reset