Insignia NS-42LCD Guide De L'utilisateur page 35

Insignia NS-42LCD 42-inch LCD TV
PBP (picture-by-picture)
PBP mode splits the screen into two, allowing
two pictures to be shown on the TV screen at the
same time. Each picture is given half the screen.
Note
The main picture source can be any video type
except HDMI, but the sub-window can display only
analog TV channels or A/V programs.
POP (picture-out-of-picture)
You can use POP to scan the programs of all
memorized channels on the three mini-windows,
while the main window displays the current
program.
Note
The main picture source can be any video type
except HDMI, but the sub-window can display only
analog TV channels
Swapping the PIP/PBP picture
To swap the PIP/PBP picture:
1 Press the SWAP button.
Selecting the PIP sub-picture position
To select the PIP sub-picture position:
1 In PIP mode, press the P.POSITION button
Selecting the focus window
While in a multi-window mode, you can select
any of the windows to make changes on the
window.
To change the focus window:
1 Press OK. The focus changes from the main
www.insignia-products.com
Note
The SWAP button works only when the main
picture displays an analog TV channel or A/V
program.
to cycle through the available sub-picture
positions.
picture to any of the sub-pictures.
35