thuba HL43i-200 Manuel page 7

Manual
BVS 12 ATEX E 004
Whenever work is done on the explosion-
proof hand and machine lamps, the national
safety and accident prevention regulations
and the safety instructions given in this Man-
ual (stated in italics as in this paragraph)
must always be observed.
2. Conformity with Standards
The explosionproof hand lamps meet the
requirements of EN 60079-0, EN 60079-11 and
EN 61241-11. They have been developed, man-
ufactured and tested in accordance with state-
of-the-art engineering
9001:2015.
3. Technical Data
3.1 Marking
1
II 1G Ex ia IIC T4 Ga
II 1D Ex ia IIIC T125°C Da IP68*
3.2 Certification
3.2.1 EC-type examination certificate
BVS 12 ATEX E 004
3.2.2 IECEx Certificate of Conformity
IECEx BVS 12.0003
3.3 Lamp enclosure ingress protection
Degree of protection IP 68
*
(Head of water above test specimen 2.5 m, test duration
24 hours)
1
IIC for types HL 43i-200 and HL 43i-250
IIB for types HL 43i-500
Edition August 2022
Copyright
practice and ISO
thuba Ltd., CH-4002 Basel
Switzerland
5