Table des Matières
Publicité
Manual
BVS 12 ATEX E 004
Explosionproof Hand Lamps in Protection
Types
Ex ia IIC Ga (Category 1G) and
Ex ia IIIC T180°C Da (Category 1D)
Type HL43i–200, HL43i–250 and HL43i–500
Target group
Experienced qualified electricians in accordance
with the occupational health and safety decree
and trained persons.
Contents:
1.
Safety rules
2.
Conformity with standards
3.
Technical data
4.
Installation
5.
Inspection, Maintenance and Repair
6.
Disposal
1.
Safety Rules
The explosionproof hand lamps HL43i are used
in hazardous areas designated as Zones 0, 1
and 2 as per EN 60079-10-1 or Zones 20, 21
and 22 as per EN 60079-10-2.
Operate the hand lamps only for their intended
duty and when in an undamaged and clean con-
dition, and only where the enclosure material is
capable of withstanding the ambient conditions.
The explosion-protected HL43I hand lamps
may only be operated with the associated
power supply unit, type PS43i.***, incorpora-
ted in an intrinsically safe circuit.
In the event of incorrect assembly, the degree of
protection IP 68 (2.5 m head of water above test
specimen with a test duration of 24 hours) as per
EN 60529 will no longer be assured.
No modifications or repairs may be carried
out on the explosionproof hand and lamps.
Edition August 2022
Copyright
thuba Ltd., CH-4002 Basel
Switzerland
3
Publicité
Table des Matières
