Setting Up The Usb Hub; System Requirements - Dynex DX-HUB23 Guide De L'utilisateur

4

Setting up the USB hub

USB Peripherals
Connect to USB keyboard,
mouse, camera, printer, etc.

System requirements

To use the USB hub, your computer must have:
Installing the USB hub
To install the USB hub:
1 Plug the cable into a Type A connector on the computer. The computer
2 Plug the cables from the USB devices/peripherals into the downstream
3 Optional: Plug the power adapter into an AC electrical outlet, and then plug
USB-enabled laptop
• USB port
• USB-compliant operating system, such as Windows 98SE, Windows 2000,
Windows ME, Windows XP, Windows Vista, Mac OS 8.6 or above.
detects the hub and installs the required drivers.
ports.
the other end of the cable into the USB hub's power connector.
Note: Your computer's USB controller can power some USB devices, but the
controller may not provide enough power for all the USB devices you plug in.
By connecting the USB hub to an electrical outlet, you make sure that all the
USB devices get enough power.
Setting up the USB hub