Table des Matières
Publicité
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter (23) and clean it by tapping
to remove the dirt and then replacing it in
the vacuum cleaner.
Cleaning the air outlet filters
Depending on the model you have chosen your
appliance is equipped with different types of
filters: foam filter (31),electrostatic filter or HEPA
filter (24).(depend on model)
To change the filter or clean the HEPA filter
(24) push the release level (27) and lift the
cover (25) up, then take the filter out.
To replace the cover (25) after changing or
cleaning the filter, insert the cover (25) by
aligning the filter cover ribs (28) with
groove (29) of body cover, then push down
the cover (25).
The foam filter (31) should be cleaned
regularly by tapping it to remove the dirt.
The electrostatic filter should be changed
regularly. (approximately every 6 bag changes).
The HEPA filter (24) should be cleaned by
tapping it at least once a year
What to do if your appliance
does not work?
Check that the appliance is correctly plugged in
and that the electrical socket is working.
What to do when the suction
performance reduces?
Stop the appliance and unplug it.
Check that the tubes, flexible hose and
cleaning tool are not blocked.
Check that the dust bag is not full. Replace
if necessary.
Check that the air outlet filter is not blocked.
Replace if necessary.
- 12 -
Publicité
Table des Matières
