Alarm Time Setting; Using Alarm Function - Oregon Scientific EW93 Mode D'emploi

12/24 Hr setting Time setting
Month-Date setting MD/DM setting
Note
1. During the setting period, press and hold "+/
CHANNEL" or "-/MIN.MAX." key to speed up
the change of settings.
2. Through "+/-23 hours time difference" setting,
the precise time of another area will be shown.

ALARM TIME SETTING

1. In normal time mode, press "SET ALARM"
key once to enter the alarm time setting
mode.
2. Press "+/CHANNEL" or "-/MIN.MAX." key to
set hour/minute.
Time difference setting
Year setting
7
3. Press "SET ALARM" key to save and exit the
setting mode. " " indicates alarm is ON.
Normal time mode
Note
1. The alarm will be automatically turned on when
you set the alarm time.
2. During the alarm time setting period, press
and hold "+/CHANNEL" or "-/MIN.MAX." key
to speed up the change of settings.

USING ALARM FUNCTION

1. Set the alarm time as the above section.
2. In normal time mode, press "ALARM ON/OFF"
key once to display the current alarm time.
3. Press it again to turn alarm ON/OFF.
Alarm time setting mode