empasa Hexa Flame Instructions De Montage Et D'utilisation page 34

Assembly

Fasten the reflector screen
upper part of the cover
Make sure that the flame arrester
two spacers.
The gas heater with a large 3-piece reflector screen is avai-
lable as an option. This must be installed as follows

Now screw the completed cover on the upper part with the
screws 15 .

Push the upper part onto the lower part so that the
connectors slide into the aluminium profiles.
34
10 with the wing nuts
14 using the spacers 11 and
is mounted between the
12
9 to the
10
13 .
9
11
12
13
14
V1/2018_EM/CZGB-S