Star SP312F Guide D'utilisation page 57

Print speed:
Line spacing:
Paper feed method:
Paper feed speed:
Paper specifications
Paper type:
Paper width:
Roll diameter:
Thickness
Internal diameter of roll:
Ink ribbon specifications
Ribbon type:
Color:
Ribbon material:
Ribbon life:
Interface:
Serial interface:
Parallel interface:
Data buffer:
Peripheral unit drive circuit:
Power Supply:
Approx. 3.2 lines per sec.
1/6-inch (initial setting), 1/8-inch, 1/12-inch,
n/72-inch
Friction feed
Approx. 3 inches/sec.
Ordinary bond and carbonless copy paper
82.5 ±0.5 mm (3.25 inches)
76 ±0.5 mm (3.0 inches)
57.5 ±0.5 mm (2.25 inches)
85 mm (3.35 inches) max.
(single) 0.07 mm to 0.10 mm
(copies) Original + 1 copy (Max. 0.14 mm)
Original + 2 copies (Max. 0.2 mm)
However, paper that can be cut with the auto
cutter is one sheet of 0.06 – 0.085 mm
thickness.
12 ±1 mm
Note: The paper must not be glued to the core.
Cartridge cassette
Standard purple or optional black
Nylon (#40 denier)
Purple (standard) 6,000,000 characters
Black (option) 1,600,000 characters
RS-232C serial interface (standard)
20 mA current loop (option)
RS-422A (option)
Centronics compatible
Selectable between 4 K and 256 bytes
2 circuits (24 V, max. 1 A with a 1 circuit
compulsion switch)
AC120 V ±10 % 60 Hz (for US)
AC230 V –10 % ~ 240 V +10 % 50/60 Hz
(for EC)
AC220 V ±10 % 50/60 Hz (for Hong Kong,
Korea)
– 55 –