ecofort ecoQ CleanAir 400 Mode D'emploi page 30

① Ensure the device is powered-off and unplugged.
② Take out the filter to clean any dust from the surface of it.
③ Use a soft cloth with neutral cleanser to clean away any dust or debris from the
surface of the filter housing.
④ After the filter is dried, install it into the air purifier to restart.
If you do not use the air purifier for a long time, ensure the device is dried out, put on the
dust cover bag and place it in a cool and well-ventilated place.
56
FAQ
SITUATION
Is it plugged into a power socket? Is there a power on the plug?
Not working
Is the home leakage switch or fuse cut off?
Is the filter replacing indicator flashing?
Poor
Is there any dust in the surface of primary filter?
performance
Is there any obstacle blocking the air inlet/outlet?
Is there anything stuck on the fan in the air outlet?
Significant Is the machine tilted?
noise
Please set a lower grade of wind speed if the noise is too loud or set low
grade of wind speed when using in bedroom at night.
It is a normal phenomenon that the device emits the smell of plastic for the
first hours.
Nasty smell
The device will emit nasty smell if the filter is dusty, so in this situation,
coming out
please clean or replace the filter.
If a burning smell emits from the device, please unplug the power socket
and contact the seller or customer service.
The replace filter
Please press the power button for 7s to reset the replace filter reminder
reminder is still and the life counter of the filter will re-start.
flashing after filter
has been replaced
with a new one
Notice: If the above FAQ cannot solve your problems and need maintenance, please contact the
supplier or after sales service center. Please do not disassemble the machine to maintain by yourself.
REASON/SOLUTION
57