Kohler K-737 Mode D'emploi page 3

2-7/16"
(62 mm)
3-3/4" (95 mm)
1. Prepare the Site
Provide a 2-7/8" (73 mm) to 3-1/8" (79 mm) diameter hole in the
wall material for the plaster guard.
Route a 3/4" mixed water supply line to the transfer valve
location.
Apply thread sealant to the inlet port threads and connect the
water supply to the valve inlet.
Two-Way: If two accessories will be attached to the valve, go to
the "Two-Way Installation" section.
Three-Way: If three accessories will be attached to the valve, go
to the "Three-Way Installation" section.
Kohler Co.
All manuals and user guides at all-guides.com
Plaster Guard
Max
Finished
Wall
Inlet
Mixed Water
Min
Supply 3/4" Copper
Finished
Tubing or Piping
Wall
3 1205548-2-B