Ltc Audio ATM6100MP5-HDMI Manuel D'utilisation page 5

12. VOLUME: Use these buttons to turn up or down the volume
13. Fast rewind/Forward: Use either of these buttons to fast rewind or fast forward within the tracks or video.
14. Previous: On the main menu page, press this button to select previous icon and then press
"Play/Pause/Record" button to confirm. In USB/SD & tuner mode, press this button to go to previous track
or station.
15. Next: On the main menu page, press this button to select next icon and then press "Play/Pause/Record"
button to confirm. In USB/SD & tuner mode, press this button to go to next track or station.
OPERATION
Select a central location for the amplifier.
Connect the speaker wires (red & black) to the + and – terminals on the rear panel of the amplifier.
Connect the audio signal to the relevant sockets with the correct polarity.
Plug the mains lead in and switch the amplifier on once you have checked all connections.
Switch the audio sources on and adjust the master volume to the required level.
Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it is
switched off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and
adjust slowly the volume and the echo.
If you don't use the unit any longer, switch the amplifier off and disconnect it from the mains.
Signal Sources and their Connections:
• Connect a DVD-player or a CD-player to the terminal AUDIO INPUT or a data storage unit to the
USB-interface or insert a SD-memory card in the suitable slot or activate the Bluetooth function on your
smartphone.
• Select the active signal source by pressing the MODE button until the desired input source is displayed.
• Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.
• If you wish to use the karaoke function of this device, insert one or two microphones into MIC1 and MIC2.
Their signals are going to the signal output too.
©Copyright LOTRONIC 2016 ATM6100MP5-HDMI 5