Wall Mounting; Ventilation Openings - Renkforce Rf-Pj-300 Notice D'emploi

b) Wall mounting
Wall mounting hole
• Use the wall mounting hole to attach the projector to a wall.
• In addition, make sure that the load-bearing strength of the mounting surface and the
fastening elements (e.g. screws) is sufficient.
c) Ventilation openings
Do not cover the air cooling openings during use, as this may cause the device to overheat
or even cause a fire. There must be a continuous flow of air between the air inlet and outlet.
Micro SD
Lufteinlass Air inlet Luftauslass Air outlet
14