Door Reversal Instructions - Danby DFF101B1WDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side during this process it
must be allowed to stand upright for 6 hours before plugging in to
avoid damage to internal components.
1. Remove the screw hole cover from the top left side of the cabinet.
Remove the upper hinge cover and the upper hinge from the
top right side of the cabinet. Remove the freezer door from the
cabinet.
2. Remove the hinge pin from the upper hinge. Flip the upper hinge
over. Reinstall the hinge pin on the opposite side of the hinge.
3. Remove the center hinge from the cabinet. Remove the refrigerator
door from the cabinet.
4. Move the hinge hole sleeve from the top right side of the
refrigerator door to the top left side of the refrigerator door. Move
the hinge hole cover from the top left side of the refrigerator door
to the top right side of the refrigerator door.
5. Move the screw hole covers from the center left side of the cabinet
to the center right side of the cabinet.
6. Remove both adjustable feel from the bottom of the cabinet.
7. Remove the lower hinge from the bottom right side of the cabinet.
8. Move the screw hole covers from the bottom left side of the
cabinet to the bottom right side of the cabinet.
9. Remove the hinge pin from the lower hinge. Flip the lower hinge
over and install the hinge pin on the other side. Install the lower
hinge on the lower left side of the cabinet.
10. Install both of the adjustable feet on the bottom of the cabinet.
11. Install the refrigerator door on the cabinet. Flip the center hinge
and install it on the center left side of the cabinet.
12. Install the freezer door on the cabinet. Install the upper hinge and
the upper hinge cover on the top left side of the cabinet. Install the
screw hole cover on the top right side of the cabinet.
1
2
3
4
5
6
7
8
9
10
11
5
12