Salter BPA-9301-EU Mode D'emploi page 16

SPECIFICATIONS
Power supply
Display mode
Measurement mode
Measurement range
Accuracy
Normal working condition
Storage & transportation condition
Measurement perimeter of the upper arm About 22cm~42cm
Net Weight
External dimensions
Attachment
Mode of operation
Degree of protection
Protection against ingress of water
Device Classification
Software version
WARNING: No modification of this equipment is allowed.
Battery powered mode: 6VDC 4×AA alkaline batteries
Blue LCD display with white backlight
V.A.73mm×49mm
Oscillographic testing mode
Rated cuff pressure:
0mmHg~299mmHg (0kPa ~ 39.9kPa)
Measurement pressure:
SYS: 60mmHg~230mmHg (8.0kPa~30.7kPa)
DIA: 40mmHg~130mmHg (5.3kPa~17.3kPa)
Pulse value: (40-199) beat/minute
Pressure:
5ºC-40ºc within±0.4kpa(3mmHg)
pulse value:±5%
A temperature range of :+5°C to +40°C
A relative humidity range of 15% to 90%, non-condensing, but not
requiring a water vapour partial pressure greater than 50 hPa
An atmospheric pressure range of : 700 hPa to 1060 hPa
Temperature:-20°C to +60°C
A relative humidity range of ≤ 93%, non-condensing, at a water vapour
pressure up to 50hPa
Approx.270g (Excluding the dry cells and cuff)
Approx.118mm×126mm×72mm
4×AA alkaline batteries, user manual
Continuous operation
Type BF applied part
IP21 It means the device could protected against solid foreign objects of
12.5mm and greater, and protect against vertically falling water drops.
Battery Powered Mode:
Internally Powered ME Equipment
A01
16 I UK