Register Your Product - U.S.Robotics USR5417 Wireless MAXg PCI Adapter Guide D'installation

this information, click Finish. Your Wireless MAXg Router and PCI Adapter should all be con-
figured and ready for use.
Congratulations!
should be connected to the wireless network that you set up.
If you experience any problems connecting to a wireless network, refer to the Troubleshooting
section in this guide or to the Configuration section of the User Guide on the U.S. Robotics
Installation CD-ROM for more information.
Opening the Configuration Utility
You should now see a small icon for the Configuration Utility in the system tray by your clock on
your computer desktop. You can open the Configuration Utility in two ways:
• Right-click the icon and click Open Utility.
• Left-click once on the Utility icon to open the quick connect screen. In the quick connect
screen, you can select an available network and enter the Network key, if applicable. Click
Connect to establish a wireless connection. You can also click Advanced to open the full
Configuration Utility.
The Configuration Utility is used to change or verify the configuration information that relates to
your Wireless MAXg PCI Adapter. The Configuration Utility icon will be colored to indicate the
status of your wireless network: red for disconnected and green for connected with good quality.

Register your product

Register your product online at http://www.usr.com/productreg
4
You have finished installing your product! The Wireless
MAX
g PCI Adapter