CAME BPT XTS 7 WH WIFI Manuel D'installation Et De Configuration page 26

Configuration X2
19:02
Network
Type of connection WiFi
C
Enabled
D
Mode
E
IP address
F
Netmask
G
Gateway
H
DNS
Address MAC
19:02
1
D Lets you choose the type of address from:
DHCP
The device's IP address is assigned by the DHCP server; if there are no special needs, this mode lets you
continue with the settings without adding any additional data.
Static
The device's IP address is manually assigned.
E IF you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of
the router and of the other connected devices.
F If the netmask is different from the default one, provide the proper netmask.
G Provide the default gateway for your network.
H Enter a valid DNS address to have the CAMEConnect connection (for example, 8.8.8.8.).
Send SN
Manual programming
Thursday
01 Feb 2018
YES NO
Configure WiFi
DHCP Static
Save
Thursday
01 Feb 2018
A
B
Info Back Home
Info Back Home
A This button is for sending the
SN (serial number) to the Pcs/Xip
software during the programming
steps.
B This button takes you to manual
programming of the device.
the complete manual pro-
gramming procedure for the call
is printed in the literature that is
issued with the indoor receivers.
C This button is for enabling WiFi
communication.
This icon shows that the WiFi
connection is active, enabling the
network-settings sections below.