Brief Description; General Assembly Instructions - RADEMACHER RolloTron Comfort 9640 Série Mode D'emploi Et D'installation

i

8. Brief description

The roller shutter belt winder is a roller shutter drive
designed for use inside. The unit is installed as a flush-
mounted device. The power supply is provided via an
connecting cable with mains plug or a fixed installed lead.
i

9. General assembly instructions

Poor routing of the belt can cause the belt to fail and
leads to unnecessary loads on the roller shutter belt
winder.
◆ Install the belt winder so that the belt runs as straight
as possible into the device, in order to avoid unneces-
sary friction and wear.
86
Features and
control options:
◆ Manual operation
◆ Automatic timer, with a separate switching time for
UP ( ▲ ) and DOWN ( ▼ )
◆ Switching the automatic timer on-/off
◆ Random function
◆ End point setting
◆ Software reset
Incorrect installation can
lead to property damage.
◆ Strong forces are exerted during operation of the sys-
tem which require secure installation on a firm base.
EN