Electrical Specifications; Pre-Installation - Ketra X96 Guide D'installation

Electrical Specifications

Output
21 V- Max 96 W to power LS0 luminaire
3.3 V- control signal to control light level
and color temperature of LS0 luminaire

Pre-Installation

Important Notes:
• For installation by a qualified electrician in accordance with all local and national electric codes.
• Turn power off before installing.
• Damage to this product caused by wiring with power on voids the warranty.
• Use copper conductors only.
• For indoor use only.
• For use only with LS0 luminaires.
• DO NOT install if the product has any visible damage.
• If moisture or condensation is evident, allow the product to dry completely before installation.
• Operate between 32 °F and 104 °F (0°C and 40°C) ambient.
• 0% to 90% humidity, non-condensing.
4 | X96 INSTALLATION GUIDE
Input
120/277 V~ 60 Hz Max 110 W
Current 0.92 A/0.40 A
Please read before installing.
P/N 3662663 Rev A
© 2021 Lutron Electronics Co., Inc.