aidapt VB543 Manuel D'instructions page 5

THREADED LEG ADJUSTMENT
Your shower seat may have special threaded leg adjustment as opposed to the
standard extension leg.
To adjust the height of your seat, carefully open the stainless steel M10 locking nut
and undo the threaded stem to the desired height. On no account exceed a
finished height of 470 mm measured from the top of the seat to the bottom of the
black circular foot, as this may compromise the safety of the user.
Once you have reached the desired height, lock the stem in place by tightening the
lock nut against the black indented bush.
NB. Occasionally the extension stems may be slightly angled inwards to the
frame. This is not a fault and will not impair the function or safety of the
product, provided that you tighten off the lock nut as required.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
This includes:
PAT test for electrical items
•
Tightness of all nuts/bolts/castors
•
Other screw in/bolt in/push in components.
•
Also check all upholstery for security, splits, etc.
•
If in any doubt, please do not issue or use, but immediately contact your supplier
for service support.
When reissuing, a risk assessment may be required as to the suitability of the chair
for a particular user.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part
of or establishing any contractual or other commitment by Aidapt Bathrooms
Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or
representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the
product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the
assembly/use of your product.
Fixing and Maintenance Instructions
5
Ver. 4 06/2013 (1011)