Hama 00049256 Mode D'emploi page 7

g User manual d Bedienungsanleitung
Package contents:
• USB 2.0 5-way PCI card
• Printed guide
• Package slip with disposal instructions
Safety instructions:
• Be aware that static electricity can
damage both the card and your computer.
• Ground yourself by touching a metal
object.
• Keep this device away from heaters and
radiators, and free of dust or dampness
when being operated.
Installing the hardware:
You must open your computer to install the
card. Ensure that you have fi rst disconnected
your computer from the power supply. If you
are not familiar with the internal setup of
your computer, please consult your computer
manual or ask a qualifi ed technician.
• Switch off your computer and all
connected devices.
• Unplug your PC before beginning
installation.
• Open the case of the computer.
• Hold the PCI card by the edges of the
printed circuit board and insert it into the
free PCI slot.
Note: Be aware that static electricity can
damage both the PCI card and your computer.
Ground yourself by touching a metal object.
• Select a free PCI slot.
• Remove the plate for this slot. Keep the
screw – you will need it later to secure the
PCI card.
• Carefully push the card into the slot until
the holding bracket is lined up with the
casing and the gold-plated contacts have
disappeared into the slot.
• Secure the card using the slot cover plate
screw you removed earlier.
6
• Close the case of your computer, and
reconnect it to the power supply.
• Restart your computer
Card
PC
Installing the software:
Installation on Windows Vista 32-bit editions
Because Windows Vista already includes
the necessary drivers, you do not need to
install any drivers separately. After you have
inserted the card into your computer and
restarted Vista, the computer recognizes and
installs the card after a short time.
You can verify whether the controller has
been successfully installed by checking
under Start (Windows logo) -> Control Panel
-> System and Maintenance -> Device
Manager. Under some circumstances, you
may be asked by User Access Control to
approve this action. Click -> Continue. The
following entries must appear without a
yellow exclamation mark.
Universal Serial Bus controllers
• NEC PCI to USB open host controller
• Standard Enhanced PCI to USB Host
Controller
• USB root hub
• USB root hub
Slot plate