Unit Structure; Accessories - Danby Premiere DPA110DHA1CP Guide D'utilisation Et D'entretien

Identifying Parts

UNIT STRUCTURE

Air outlet
Control panel

ACCESSORIES

ELECTRIC SHOCK HAZARD: To avoid the possibility of person-
al injury, disconnect power to the unit before installing or servic-
ing.
Installation Accessories:
• Flexible exhaust hose (ø 13cm)
• Exhaust nozzle connecter (fi x to unit, 2 pcs, 1/set)
• Adjustable window door slider kit (3 pcs) from 28
up to 80" (203cm).
• Fixture (2 pc)
• Screws (8 pcs)
NOTE: The exhaust / window kit must be installed at all times
when the unit is operating under AIR CONDITIONING mode.
There should be at least 11.8" (30cm) clearance between the unit
and any other objects or building structures, and the unit should
be installed on a level fl oor. The unit does not have to be vented
outside during dehumidifying or fan only mode operation. When
the unit is in dehumidifying mode, the warm air exhaust must be
vented inside the room.
Instructions for assembling the window adapter kit (Fig. 2)
1. Insert tube adapters through the back of the window panel.
2. Secure each tube adapter with four screws through the front
of the window panel.
3. Insert window panel extensions into window panel. Lightly
tighten the screws in the window panel to hold the extensions
in place.
Water outlet drain
(for continuous
drain operation for
dehumidify mode only)
Air outlet
(heat exchange)
Handle hole
Power supply cord
Caster
1/3 " (72cm)
5
Water outlet drain
Exhaust nozzle
connector
(Fix to window kit)
• Ensure that all the accessories are included in the
package and refer to the installation instructions
for their usage.
Note: All the illustrations in this manual are for ex-
planatory purposes only. Your air conditioner may be
slightly different.
Air filter
Air intake
(Evaporator)
Air intake
(condenser)
Exhaust nozzle
connector
(Fix to unit)