Kenwood KVT-617DVD Manuel D'installation page 10

■ Installation on Toyota Car using Brackets at Holes shown by "●"
When using the bracket shown above, you cannot use screws at two holes of
the right and left unit sides. If so, tighten the bracket using accessories 0 as
shown below.
1. Use accessories 0 at both sides as shown.
2. Mount the bracket at each side.
Accessory ! (M5x6mm)
Screws (included in
audio unit package)
10
|
English
or
Audio unit or others
Accessory 0
Car Bracket
Accessory ! (M5x6mm)
Screws (included in
audio unit package)