Light-N-Carry LENEXA LNC7250 Manuel De L'opérateur page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All of the accessories (head strap, belt clip, action mount) utilize our
M-LOCK mounting system. To utilize these accessories, simply join
the magnetic base of the action light to the accessory as shown on
page 5.
Battery Access
Your action light is powered by a Clore PROFORMER 18650 lithium
battery. The battery is swappable and replaceable. The battery com-
partment is accessed through the side cap with the arrow on its face.
Note that there are two notches in the edge of the cap, one to indicate
that the cap is in the closed position, one to indicate the cap is in the
open position, when each notch is aligned with the notch on the top of
the light.
To access the battery compartment, rotate the battery cap counter
clockwise a quarter turn until the second notch is lined up with the
notch in the top of the light. Pull the cap to remove the battery. To close
the compartment, line that same notch up with the notch in the top of
the light and then rotate the cap a quarter turn clockwise until the first
notch is again aligned with the notch in the top of the light.
CLOSED - NOTCH POSITION 1
OPEN - NOTCH POSTION 2
PULL CAP OFF
7

Publicité

Table des Matières
loading

Table des Matières