Festo CP FB11-E Notice Simplifiee page 11

CP FB11-E
1
User instructions
The CP fieldbus node 11 is designed exclusively for use as a
slave on the Allen-Bradley DeviceNet. The limit values of the
technical specifications must be observed.
Please refer to the manual P.BE CP-FB11-E... for detailed infor-
mation.
WARNING:
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a node which is completely fitted and
electrically wired.
9709 NH
, if the node
11