Remote Control Pairing - TEMPUR-PEDIC ACTIVEbreeze ERGO EXTEND Manuel Du Propriétaire

remote control pairing

Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
STEP 1
Locate the battery backup box and press
the button TWICE. A light on the battery
back up box will illuminate.
STEP 2
Remove the back cover of the remote, press
and hold down the PAIR button. The PAIR
button will illuminate blue and start flashing.
When the PAIR button stops flashing, the
illuminated light on the battery backup box will
go out. Release the PAIR button. The remote
is now paired to the adjustable base.
2b. *For pairing two Queen remotes only:
• With the remote that you just paired,
press and hold Head Massage button for
6 seconds to activate "send mode". The
backlights will begin flashing.
• Within 30 seconds, take the second remote and hold down
the Foot Massage button for 6 seconds to activate "receive
mode". Backlight will begin flashing and receive pairing from
the first remote.
STEP 3
Test all remote functions. If the remote buttons do not impact
the adjustable base movements, please repeat the process again
or call Tempur-Pedic customer service:
U.S. 1-800-821-6621 | Canada : 1-800-887-4321
All manuals and user guides at all-guides.com
*ALTERNATE REMOTE PAIRING PROCESS
Locate the control box (see parts list on page 5) and
press the button twice. A green LED light will illuminate
on the control box. On the back of the remote, press and
hold the PAIR button. The PAIR button will illuminate
blue and start flashing. When the PAIR button stops
flashing, the green LED light on the control box will go
out. Release the PAIR button. The remote is now paired
to the adjustable base. For queen size, return to step 2b
to pair the 2nd remote control.
PAIR
Button
Child Lock Feature
Activate Child Lock
Deactivate Child Lock
Press and hold HEAD UP and HEAD DOWN buttons
together for approximately six (6) seconds. The remote
backlight will flash twice. When the backlight light goes
away, the remote is now in Child Lock.
buttons while in Child Lock will yield no movement to
your adjustable base.
Press and hold FOOT UP and FOOT DOWN buttons
together for approximately six (6) seconds. The remote
backlight will flash twice. When the backlight light goes
away, the remote is no longer in Child Lock. The remote
and adjustable base will work normally.
Pressing any
13