Kenmore Vacuum Cleaner Warranty - Kenmore 116.23385C Manuel De L'utilisateur

KENMORE VACUUM CLEANER WARRANTY

Kenmore Vacuum Cleaner Limited Warranty
General: All models of Kenmore Vacuum Cleaners, with the exception of central vacuum
systems, which shall be subject to different warranty provisions, are warranted to be free
from defects in materials or workmanship for a specific time period as set-out below (the
"Warranty Period"). Warranties extend to the original purchaser of a Kenmore Vacuum
Cleaner only and are non-transferable. Purchases made through an online auction or
through any website other than www.sears.ca are excluded. The relevant Warranty
Period commences on the original date of purchase. Within this period, Sears Canada,
Inc. will, at its sole option, repair or replace any products or components which fail in
normal use. Such repairs or replacement will be made at no charge to the customer for
parts or labor, provided that the customer shall be responsible for any transportation
Exclusions: This warranty does not cover failures due to normal wear, abuse, misuse,
neglect, improper maintenance or failure to follow maintenance guidelines and/or
instructions, failure to operate the product in accordance with the owner's manual or any
additional instructions or information provided at the time of purchase or in subsequent
communications with the original purchaser, accident or unauthorized alterations or
repairs made or attempted by others. Also excluded from warranty coverage are the
following:
1. "Wear Items", which are parts that will need replacement under normal usage,
including but not limited to: filters, belts, light bulbs and bags and brush roll
assemblies and brush strips
2. Service-related telephone calls or technician visits relating to a user's requirements
for instructions involving the correct product installation, operation or regular
maintenance to the product i.e. cleaning filters, brush roll assembly, hose
obstructions and the like
3. Maintenance, adjustments, and cleaning inquiries or service calls
4. Damage or failure when installation, operation and maintenance instructions provided
are not followed
5. Damage or failure resulting from accident, abuse, misuse, negligence or use for other
than an intended purpose
6. Damage or failure caused by the use of detergents, cleaners, chemicals or utensils
other than those recommended in any instructions, service bulletins or otherwise by
Sears
7. Damage or failure resulting from unauthorized modifications made to this product.
Any product missing the model and/or serial number identification label will be
disqualified from coverage under this warranty.cost.
Repairs: Repairs conducted within the Warranty Period will be warranted until the end of
the original Warranty Period.
Disclaimers: THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL OR
WRITTEN (OTHER THAN AS STATED HEREIN), AND WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY LIABILITY ARISING UNDER
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, WHICH MAY VARY FROM ONE JURISDICTION TO ANOTHER.
4
POUR CHANGER L'AMPOULE
1. Enlever le couvercle du Power-Mate comme
®
démontré dans la section POUR CHANGER LA
COURROIE ET NETTOYER L'AGITATEUR.
Enfoncer
2. Pousser sur l'am-
et tourner
poule en la tournant
vers la gauche, puis
tirer pour l'enlever.
ENTRETIEN DE L'AGITATEUR
AVERTISSEMENT
Risque de chocs électriques ou de lésions
corporelles
Éteindre et débrancher l'aspirateur avant
toute opération d'entretien de l'appareil.
L'omission de débrancher pourrait provo-
quer des chocs électriques ou des lésions
corporelles du fait que l'aspirateur se met-
trait soudainement en marche.
POUR VÉRIFIER DES BROSSES
Lorsque les
brosses sont usées
jusqu'au niveau
des barres de
support de la base,
remplacer
l'ensemble de
Barres de support
l'agitateur.
de la base
3. Pousser sur l'ampoule
Enfoncer
en la tournant vers la
et tourner
droite pour la remplacer.
L'ampoule ne doit pas
dépasser 130 volts (15
watts).
4. Remettre le couvercle du Power-Mate
®
démontré dans la section POUR CHANGER LA
COURROIE ET NETTOYER L'AGITATEUR.
REMARQUE: Voir PIÈCES ET
CARACTÉRISTIQUES pour le numéro de
l'ampoule.
POUR REMPLACER
L'ENSEMBLE DE L'AGITATEUR
1. Retirer le couvercle du Power-Mate , le couvercle
®
de l'agitateur, la courroie et l'ensemble le l'agitateur.
Voir «Pour enlever la courroie» dans la section
POUR CHANGER LA COURROIE ET NETTOYER
L'AGITATEUR.
2. Remplacer l'ensemble de l'agitateur.
3. Remettre la courroie et le couvercle du Power-
Mate . Voir «Pour enlever la courroie» dans la
®
section POUR CHANGER LA COURROIE ET
NETTOYER L'AGITATEUR.
19
comme