REVAMP Professional PROGLOSS HYDRO SHIELD X SHINE DR-6000 Mode D'emploi page 2

FEATURES
1. 15mm Concentrator Nozzle
2. 8mm Styling Concentrator Nozzle
3. Curl Enhance Diffuser Attachment
4. Cool Shot Button
5. Temperature heat control
6. On/Off & speed control
7. On/Off Hydro Shield Sensor button
8. Easy-clean removable rear filter
9. Hang-up loop
RADIANT SALON BLOW DRY
The PROGLOSS Hydro Shield X Shine Hair Dryer includes two powerful ionic jets: one
positive and one negative for salon shine and a frizz-free finish.
HYDRO SHIELD SENSOR
This dryer includes an infrared sensor which measures the
temperature on the hair and regulates the heat to ensure
hair is not over exposed to high heat. Switch the sensor
on by the dedicated button, and see the indicator at the
top of the hair dryer illuminate, to show your hair is being
protected whilst you dry and style.
PROGLOSS™ SUPER SMOOTH OILS
Every product in the Revamp haircare range is infused with PROGLOSS™ SUPER SMOOTH
OILS - enriched with Argan, Keratin and Coconut for ultimate smoothness and shine.
CONCENTRATOR NOZZLES
Styling & smoothing concentrator nozzles The concentrator nozzles allow you to direct
and focus the airflow of the hairdryer for more precision in styling and drying. Direct the
concentrator nozzle at your hair, allowing a few centimetres between the nozzle and hair.
The super slim 8mm styling nozzle (1) can be used with a styling brush for easy voluminous
styling and the 15mm smoothing nozzle (2) can be used for faster drying. The additional
diffuser attachment works to enhance natural curls.
To use the dryer with the concentrator nozzle, ensure the dryer is switched off and cool,
then attach the concentrator nozzle by firmly clicking it onto the dryer barrel head or
placing over the front end of the barrel head until it is secure.
While styling the hair using the concentrator nozzles, please be aware of the increased
temperature of the airflow of the hairdryer. Please use a low/medium heat setting when
using the concentrator nozzles and diffuser. Allow the nozzles to cool before touching.
INSTRUCTIONS FOR USE
• Wash your hair as normal and squeeze out excess moisture with a towel and comb
through to detangle.
• Apply heat protection spray before drying.
• Plug the product into a 220-240V mains power supply.
• To quickly blast dry hair, use without a nozzle. For precision drying, use the styling or
smoothing concentrator nozzles.
3
8
4
5
1
6
7
2
9
• To use the dryer without the concentrator nozzles, simply press the speed switch on
the handle to turn on the product (6).
• Adjust the heat and speed switches on the handle to the desired setting (higher heat
and speed settings for drying and lower heat and speed settings for styling):
SPEED
Off
Medium speed
High speed
• To use the Cold Shot (4), press and hold the button at the front of the hairdryer handle.
This will cool the hair and help to set the style.
• To turn the sensor on, move the sensor switch in the upward position and the light on
the top of the dryer will illuminate. To turn the sensor off, move the sensor switch to
the lower position and the light on the top of the dryer will turn off.
• After use, switch off the dryer by switching the speed setting to 0, unplug and allow to
cool before storing away.
Follow us on www.revamphair.com for the latest hair tips and advice.
CLEANING & MAINTENANCE
• If you just use the appliance, switch it off, unplug from the mains and allow to cool fully
before cleaning.
• Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or cleaners.
• Do not immerse the appliance in water or and other liquid.
• Ensure all parts are dried thoroughly with a soft towel before reusing.
• To prevent cord damage, do not wrap the cord around the appliance, always store the
cord loosely next to the appliance.
• Store in a cool dry place.
CLEANING THE FILTER
To maintain peak product performance and to prolong motor life, it is important to
regularly remove dust and dirt from the rear grille and clean.
• To remove - Turn the rear-grille anti-clockwise and pull off.
• To clean - Clean with a soft brush and replace.
• To replace - Align the grille guides with the slots in the casing (on the dryer) and turn
clockwise.
DO NOT USE APPLIANCE WITHOUT THE REAR GRILLE FILTER IN PLACE
IMPORTANT SAFEGUARDS
• This appliance can be used by children aged from 16 years and above. Persons with
reduced physical, sensory or mental capabilities should not use this product. Persons
with lack of experience and knowledge can use the product if they have been
supervised/instructed and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be done by children
unless they are older than 16 and supervised. Keep the appliance and cable out of
reach of children under 16 years.
• WARNING: for additional protection the installation of a residual current device (RCD)
with a rated residual operating current not exceeding 30mA is advisable. Ask an
electrician for advice.
• Always ensure the voltage to be used corresponds to the voltage stated on the unit
before plugging the appliance into the mains socket.
• THIS APPLIANCE SHOULD BE UNPLUGGED FROM THE MAIN SUPPLY WHEN NOT IN USE.
• WARNING: This appliance must not be taken into a bathroom. It should not be used
near bath-tubs, basins or any other vessels containing water.
• This appliance must not be used outdoors.
• Avoid allowing any part of the appliance to come into contact with the face, neck or
scalp.
• In use, take care that the inlet and outlet grilles are not blocked in any way as this will
cause the unit to automatically stop. Ensure the inlet grille is free from obstructions
HEAT
Low heat
Medium heat
High heat