Loewe klang bar5 mr Guide De L'utilisateur page 19

Loewe klang bar5 mr

Subwoofer components | Placement | Connecting the soundbar
4 Subwoofer components
1. Volume knob
Rotate to adjust the bass level.
Press and hold to enter the pairing mode.
2. Subwoofer LED indicator
5 Placement
Place the soundbar and subwoofer on a stable even
surface.
Place the subwoofer at least 1 meter (3 feet) away
from your soundbar, and 10 centimeters (4 inches)
away from the wall. We recommend the front area of
the room in a way that the basses can freely flow to
the sides.
Place the soundbar on a table underneath the TV.
Below is an example of the correct placement.
1
2
LED indicator state
LED flashes quickly
LED is on
LED flashes slowly
6 Connecting the
soundbar
Before you make or change any connections, make
sure that all devices are disconnected from the power
outlet.
6.1 Dolby Atmos®
Dolby Atmos® gives you immersive listening experience
by delivering sound in three dimensional space, and all
the richness, clarity, and power of Dolby sound.
For more information, please visit dolby.com/techno-
logies/dolby-atmos
For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode.
For the details of the connection, please refer to "Con-
necting with HDMI" chapter.
1. To use Dolby Atmos® in HDMI 1 / HDMI 2 /
HDMI ARC mode, your TV has to support Dolby
Atmos®.
2. Make sure that "No Encoding" is selected for bits-
tream in the digital audio output of the connected
external device (e.g. Blu-ray, TV etc.).
3. While entering Dolby Atmos / Dolby Digital /
PCM format, the Soundbar will show DOLBY
ATMOS / DOLBY AUDIO / PCM AUDIO / DOLBY
SURROUND.
Note
The full Dolby Atmos® experience is only available
when the Soundbar is connected to the source via a
High Speed HDMI cable.
Dolby formats appear on the front panel display only
when the display function is turned on. Press and hold
to turn on / off the display function.
The Soundbar will still function when connected via
other methods (such as a Digital Optical cable) but
these are unable to support all of the Dolby features.
Given this, our recommendation is to connect via HDMI,
in order to ensure full Dolby support.
3 4
3.
Status
4.
Subwoofer is in pairing
mode
Connected / Pairing
successful
Connection / Pairing
failed
6.2
Some 4K HDR TVs require the HDMI input or picture
settings to be set for HDR content reception. For fur-
ther setup details on HDR display, please refer to the
operating instructions of your TV.
Option 1 - eARC/ARC
(Audio Return Channel)
Your Soundbar supports HDMI with Audio Return
Channel (eARC/ARC). If your TV is HDMI ARC compli-
ant, you can hear the TV audio through your Soundbar
by using a single HDMI cable.
1.
2.
3.
When HDMI ARC connection is properly set up, you
can enjoy these features:
•
•
•
AC IN socket – connect to the power supply.
LINE IN socket – for connecting to an external
audio device via 3.5mm audio cable.
Connecting with HDMI
HDMI OUT
eARC / ARC
HDMI eARC/ARC
On your TV, turn on HDMI-CEC operations.
Using a High Speed HDMI cable (included), con-
nect the HDMI OUT (TV eARC/ARC) connector
on your Soundbar to the HDMI ARC connector
on the TV. The HDMI ARC connector on the TV
might be labeled differently. For details, see the
TV user manual.
"ARC" appears on the display of the soundbar
and the soundbar plays the TV sound. When the
TV sound is not output, press the
button repeatedly until you see "ARC" on the
display and TV sound is played.
The soundbar turns on automatically when you
turn on the TV.
The soundbar turns off automatically when you
turn off the TV.
You can mute/unmute or adjust the volume of the
soundbar using the TV remote control.
(Source)
18