SCHOTT TW alpha plus Mode D'emploi page 25

Command Response
aaQE The built-in stirrer port and
the built-in stirrer will be switched on
aaQA The built-in stirrer port and
the built-in stirrer will be switched off
aaQSz Setting the stirring speed
(z = 0 bis 9)
aaRH Device identification
aaON witch all 4 outputs on
aaOJ witch all 4 outputs off
aaOE1..4 Switch specified outputs on (1 to 4)
Separate digits by ';', example: aaOE1;3;4
aaOA1..4 Switch specified outputs off (1 to 4)
Separate digits by ';', example: aaOA1;2;3
aaOM1..4 The specified outputs will be monitored by
the inputs specified in the "aaOI" command
Separate digits by ';', example: aaOM2;4
aaOI1..4 The selected outputs will switch off the
inputs specified in the "aaOM" command if
"low" status is present
Separate digits by ';', example: aaOI3;4
aaOT Monitoring of the inputs is switched on.
aaIP Query of all inputs of the I/O port, only the
4 first digits are relevant
aaWA This command has no effect, but is
continued for compatibility reasons
aaWO This command has no effect, but is
continued for compatibility reasons
aaVE Query of the built-on software version number
aaCA The built-in Pump-Unit port is switched off
aaCE The built-in pump unit is switched on
aaCS1..9 The built-in Pump-Unit port is switched on
for the specified period of time (in s)
Reply from the TW alpha plus
aaIdent: TW280
aaI=10110000
aakeine Daten
aaVersion: MMM TT JJ
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY
aaY