Télécharger Imprimer la page

Sony BRAVIA KD-75XF90 Serie Guide De Référence page 13

Masquer les pouces Voir aussi pour BRAVIA KD-75XF90 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
CAM (Conditional Access Module)
• Provides access to pay TV services. For details,
refer to the instruction manual supplied with
your CAM.
• Do not insert the smart card directly into the
TV CAM slot. It must be fitted into the
Conditional Access Module provided by your
authorised dealer.
• CAM is not supported in some countries/areas.
Check with your authorised dealer.
• A CAM message may appear when you switch
to a digital programme after using the Internet
video.
/ AV IN
• For a composite connection, use an Analogue
Extension Cable (not supplied).
• Supports 3-pole stereo mini jack only.
• To listen to the TV's sound through the
connected equipment, press HOME.
t
Select [Settings]
[Sound]
out] and then select the desired item.
2
IR BLASTER*
• Use your Sony remote control to control your
External Box (cable/satellite box). Connect the
2
IR Blaster Cable*
to the IR Blaster port on
your TV. Place one or both of the other two
ends as shown below.
t
[Headphone/Audio
• To perform IR Blaster setup, press HOME and
t
select [Settings]
[External inputs]
setup].
USB 1/2, USB 3 (HDD REC)*
• Connecting a large USB device may interfere
with other connected devices beside it.
• When connecting a large USB device, connect
to the USB 1 port.
• Connect a USB HDD device to the USB 3 port
(blue).
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital video
and audio on a single cable.
• HDMI IN 3 ARC (Audio Return Channel)
Connect your audio system to the HDMI IN 3
to route TV audio to your audio system. An
audio system that supports HDMI ARC can
send video to the TV, and receive audio from
the TV via the same HDMI cable. If your audio
system does not support HDMI ARC, an
additional connection with DIGITAL AUDIO
OUT (OPTICAL) is necessary.
(RF input),
(Satellite input)
• Connections for terrestrial/cable and satellite.
Connection steps: SUB.
• For SUB. jack, connect only when you are using
twin tuner mode except for Single Cable
Distribution EN50494.
t
[IR Blaster
2
t
t
MAIN
Antenna
GB
13GB

Publicité

loading