Sewosy KR1000-M Notice De Mise En Oeuvre page 15

Enter the master code 2 X or swipe the master card 1 X
(Default code is 1234)
Enter * 1
Enter the 2-digits value (mandatory): from 01 to 99 sec.
or enter 00 (for bistable function)
Enter # #
Enter the master code 2 X or swipe the master card 1 X
(Default code is 1234)
Enter * 5
Enter the 2-digits value (mandatory): from 01 to 99 sec.
or enter 00 (for bistable function)
Enter # #
How to restore the default master code (1234)
Switch off the power supply from the keypad
Press # key. Keep it pressed for 3 seconds while
powering the device again
SETTING OF THE UNLOCKING TIME
 RELAY 1 (from 01 to 99 seconds) 
 RELAY 2 (from 01 to 99 seconds) 
(in case of lost or forgotten master code)
long BEEP + LED will turn green
LED will flash green
long BEEP + LED will turn green
LED will turn blue
long BEEP + LED will turn green
LED will flash green
long BEEP + LED will turn green
LED will turn blue
all LEDs light off
long BEEP + LED will turn blue
15/24