Sewosy KR1000-M Notice De Mise En Oeuvre page 12

SETTING MODE
Attention: this modification must be done before the first programming of a code
Enter the master code 2 X
Enter * 904
Enter the digits (X is from 2 to 6)
Changing digit number erases all previous records!
If X = 2 the master code is 12
!
If X = 3 the master code is 123
If X = 4 the master code is 1234
Enter # #
Enter the master code 2 X
Enter * 7
Swipe the card 1 X
Enter # #
Enter the master code 2 X or swipe the master card 1 X
(Default code is 1234)
Enter * 7
Enter **
Swipe the card 1 X
Enter # #
It is recommended to modify the master code which allows to open the setup
session for security reasons. The user codes must be different from mastercode
Enter the master code 2 X or swipe the master card 1 X
(Default code is 1234)
Enter * 3
Enter the new code 2 X
Enter # #
Changing number of digits (codes)
(factory setting = 4 digits)
(Default code is 1234)
Create a master card
The master card allows to open the setup session
(Default code is 1234)
Changing a master card
Changing a master code
long BEEP + LED will turn green
long BEEP + LED will flash green
long BEEP + LED will turn green
If X = 5 the master code is 12345
If X = 6 the master code is 123456
LED will turn blue
long BEEP + LED will turn green
LED will flash green
long BEEP + LED will flash green
LED will turn blue
long BEEP + LED will turn green
LED will turn green
long BEEP + LED will flash green
long BEEP + LED will turn green
LED will turn blue
long BEEP + LED will turn green
LED will flash green
long BEEP + LED will turn green
LED will turn blue
12/24