Configuring The Swarm Control | Via The Light Admin App - Waldmann TALK EnOcean Manuel D'utilisation

ENG
group adr. = 7
Fig. 14: Example: Groups 7 and 8 luminaire
detects presence.
When a luminaire that is present in two
groups detects presence, this luminaire is
switched to work lighting.
The other luminaires that are present in
both groups but do not detect presence
are switched to background lighting, see
Fig. 14.
44
group adr. = 8
area adr. = 15
Configuring the swarm control
7.2 Configuring the
swarm control | Via the
LIGHT ADMIN app
NOTE: For EnOcean, LIGHT ADMIN is avail-
able as a Windows app. Connecting the
app to the luminaires via EnOcean requires
a gateway. You can purchase the gateway
from Waldmann as an accessory or from
your electrical retailer. Designation: USB
300 EnOcean Gateway.
X Download the LIGHT ADMIN app.
The link for downloading the app for
Windows can be found at our website
www.light-admin.com.
X Register for the use of the LIGHT ADMIN
app under
www.waldmann.com/registration.
X Set the sliding switch and all rotary cod-
ing switches on the module to posi-
tion 0.
X Plan which areas and which groups the
luminaires should be affected to.
X Configure the swarm control via the
LIGHT ADMIN app.