Connection; Connecting The Module To A Lavigo Or Lavigo Vtl Luminaire - Waldmann TALK EnOcean Manuel D'utilisation

ENG
6.

Connection

6.1 Connecting the module to a
LAVIGO or LAVIGO VTL lumi-
naire
When the module is connected to the lumi-
naire, all luminaires to which a module has
been connected start communicating with
one another automatically.
NOTE: The delivery includes several con-
necting lines in different lengths. Use the
shortest connecting line possible for your
luminaire model.
Fig. 5: Module control interface.
X Connect one end of the connecting line
to the "module control" interface on the
module, see Fig. 5
40
1
2
3
4
No Designation
1 Tastm. (operating element)
2
HFMD sensor, PIR sensor
3
TIME module
(LUM CONNECT VTL)
4
TALK module, KNX/LON mod-
ule
Tab. 2: Assignment of the sockets.
X Connect the other end of the connect-
ing line to the interface 4 „TALK mod-
ule, KNX/LON module" on the luminaire
control in the luminaire head, see Tab. 2.
Connection
4