TAG Heuer SBG8A Manuel D'instructions page 4

Table des Matières

Publicité

INSTRUCTIONS AND GUARANTEE – TAG HEUER CONNECTED
CHARGING ACCESSORIES – FOR MODEL SBG8A
PART I
HANDLING INSTRUCTIONS
PART II
SAFETY & REGULATORY INFORMATION
PART III INTERNATIONAL LIMITED GUARANTEE
PART IV TAG HEUER CONTACT POINT AND CUSTOMER SERVICE
CENTERS
PART I: HANDLING INSTRUCTIONS
Please read carefully below information before using your accessories and contact
your nearest official TAG Heuer Customer Service if help is needed. Risk to break
or scratch your product by misreading the information is high and will void your
International Limited Guarantee.
Your TAG Heuer Connected Watch accessories are only compatible with
2
this specific TAG Heuer Connected Watch model (see model reference
mentioned above) and are not suited to be used with any other product
from TAG Heuer (including other models of TAG Heuer connected watches)
or any other brand.
CHARGING YOUR TAG HEUER CONNECTED WATCH
Before using your TAG Heuer Connected Watch for the
first time, you should charge the battery.
1. Please connect the cable to the charging puck and
place your TAG Heuer Connected Watch onto the
charging puck.
2. Magnets on charger will help align the watch correctly
on the charger.
3. After your TAG Heuer Connected Watch is aligned on
the charging puck, plug the USB cable into the wall
plug you received when you first bought the TAG Heuer Connected Watch.
Plug it into an authorized power source.
4. You will see a charging symbol on your TAG Heuer Connected Watch letting
you know that it is charging and the time remaining to fully recharge your
TAG Heuer Connected Watch.
2
PART II: SAFETY & REGULATORY INFORMATION
2
A.
Important safety precautions
Please note that failure to comply with the following guidelines may cause
5
malfunctions or be hazardous to the user and/or exclude or reduce the benefit
12
from the International Limited Guarantee.
Use only those accessories approved by TAG Heuer and compatible with
your specific product.
1. Using the TAG Heuer Connected Watch charging accessories safely
(i) General
Do not use or store the TAG Heuer Connected Watch accessories in dusty, dirty
areas as its components may be damaged. Do not store them in warm or cold
areas. High temperatures can shorten the life of electronic devices, damage
batteries and warp or melt certain plastics.
Keep the TAG Heuer Connected Watch and its accessories out of the reach of
children.
Avoid dropping the accessories or subjecting them to impacts.
Never apply excessive pressure when using your accessories such as forcing
a charging connector into a port because this may cause damage that is not
covered under the International Limited Guarantee. If the connector and port do
not join with reasonable ease, they probably do not match. Check for obstructions
and make sure that the connector matches the port and that you have positioned
the connector correctly in relation to the port. Certain usage patterns can con-
tribute to the fraying or breaking of cables. The cable attached to a charging
unit, like any other metal wire or cable, is subject to becoming weak or brittle if
repeatedly bent in the same spot. Aim for gentle curves instead of angles in the
cable. Regularly inspect the cable and connector for any kinks, breaks, bends,
or other damage. Should you find any such damage, discontinue use of the
cable. Discoloration of the charging accessories after regular use is normal. Dirt,
debris, and exposure to moisture may cause discoloration that may occur after

Publicité

Table des Matières
loading

Table des Matières