Using Your Djmonitor 32 Speaker Kit; Technical Support - Hercules DJMONITOR 32 Mode D'emploi

3. Connect the red RCA connector on the female jack / 2 male RCA cable to the corresponding audio
output on your DVD player/television set.

3. USING YOUR DJMONITOR 32 SPEAKER KIT

1. Switch on the audio source you wish to use (PC, television set, DVD player).
2. Plug your speaker kit's power cable (4) into an electrical outlet.
3. Set the On/Off switch (3) to ON.
4. Adjust the master volume.

TECHNICAL SUPPORT

http://support.hercules.com
DJMONITOR 32
User manual – 7/7