Micro SD Card Slot
Note: The top cap can be opened with the pry bar from the accessory kit.
Press the Reset/WPS Button to enable WPS.
Press the Reset/WPS Button for 10 seconds to reset the device.
Please refer to Table 2-1 for more details about status of LED indicator.
LED Indicator Status
Red light on
Green light flashing
Green light on
Red light flashing
Red light rapid flashing
Light off
Green and Red light flashing
alternately
Reset/WPS Button
Figure 2-2
Device status
Booting
Device malfunction
Waiting for Wi-Fi configuration
Operating properly
Network connection failed
Micro SD card malfunction
Powered off/LED turned off
Rebooting after reset
Firmware updating
Table 2-1
Bulit-in Speaker
2