Troubleshooting Specifications; Important Safety Information - Absaar HF-1212 Instructions D'utilisation

10
CONTENTS
INTRODUCTION
Thank you for purchasing an Absaar HF-1212 charger. It is designed to charge 12V (typically six 2 volt cells,
for detailed information refer to the battery manufacturer) rechargeable lead-acid, maintenance free, gel and
AGM batteries with a battery capacity up to 140Ah. The fully automatic battery charger can choose the charge
current automatically. It includes automatic protection features to ensure safety:
· Short circuit protection
· Reverse polarity protection
· Over-heating protection
· Over-voltage protection
· Automatic fan control
· The LCD display shows the current status of the unit, including charging, fully charged,
battery recondition, and reverse polarity.
THREE-STAGE BATTERY CHARGING
Multi-stage charging ensures batteries receive optimum charging:
1) Current charge
2) Constant charge
3) Floating charging

IMPORTANT SAFETY INFORMATION

Misusing or incorrectly connecting the HF-1212 battery charger may damage the equipment, on-board elec-
tronics, or create hazardous condition for users. Read the safety instructions and pay special attention to all
cautions and warning statements in the guide. Please keep this manual for future reference.
FEATURES
1.
Display Panel - indicates present voltage, present current or fault condition code.
The meaning of the codes and the solutions are shown in the table.
ntroduction
I
Important Safety Information
Features
Operation Instructions
Troubleshooting
Specifications
10
10
10
12
12
13