Function and features
The flow monitor
• detects the flow velocity in liquid and gaseous media
• switches the output according to the programming
(N.O./
or N.C./
• and indicates the relative flow value within the adjustable detection
range by means of LEDs.
LED = green
= N.O. /
Example flow < switch point:
- 1 LED is lit red
1
- LED 4 = OFF (output function =
- LED 4 = orange (output function =
Example flow ≥ ≥ switch point:
- 1 LED is lit green
2
- LED 4 = orange (output function =
- LED 4 = OFF (output function =
, programmmable by wiring; → page 14)
sensor
signal
LED = orange
= N.C.
OUT =
LED = red
, output not switched)
, output switched)
, output switched)
, output not switched)
OUT =
11