1. Prepare the Cabinet
IMPORTANT! Before installing this sink, verify that the distance to
the top of the doors (A) is greater than the apron height.
TIP: Apply painter's tape to the cabinet to mark cuts and protect the
cabinet surface when cutting.
Measure and mark 7/8" (22 mm) in from the outside edge of the
cabinet. Repeat for the other side.
Measure and mark 7" (178 mm) from the top edge of the cabinet.
Cut the cabinet along the marked lines.
Kohler Co.
8-13/16"
(224 mm)
Apron
A
3
7/8"
(22 mm)
7" (178 mm)
1400421-2-A