EA NSX 1500 Notice D'utilisation page 17

Notice d'utilisation: NSX 1500 Table de mixage 3+1 canaux
■ Top Panel
11. Microphone input for DJ MIC (MIC1). This is a balanced Combo (XLR+TRS)
connector without phantom power provision, hence only suitable for dynamic
microphones.
12. Channel Equalizer. Allows the adjustment of the tonal balance for each of the
inputs. For the microphone inputs adjustment is provided in two voice-specific
frequency bands with an adjustment range of ±12dB; for the stereo channels,
adjustment is provided in three music-specific frequency bands with an
adjustment range of -26/+12dB, thus providing a virtual "kill" function for each
frequency band if set to extreme attenuation.
13. Microphone level control. Sets the microphone level, provided that the
microphone is switched on by means of switch (14).
17