Télécharger Imprimer la page

EA NSX 1500 Notice D'utilisation page 16

Table de mixage 3+1 canaux

Publicité

Les langues disponibles

Les langues disponibles

Notice d'utilisation: NSX 1500 Table de mixage 3+1 canaux
4.
Main stereo output. This is an unbalanced out carrying the same signal as
output (3).
5.
Booth stereo output. This is an unbalanced output carrying the booth signal
controlled by (27). This output can be used for a 2
independent volume control, such as the DJ booth or the seating area of a
club.
6.
Record output. This is an unbalanced stereo output carrying the same signal
as the main output (3/4), but not influenced by the main volume control (26).
This is normally used for recording the output to an external tape, CD or
memory device.
7.
Line inputs. These RCA connectors provide inputs for line-level signals to the
assigned channels.
8.
Phono Inputs. Depending on the position of the selector switches (9), these
RCA connectors provide the following inputs: (A) Position "PHONO": input for
phono-level signals to the assigned channels, featuring the necessary RIAA
equalization. (B) Position "LINE": input for line-level signals to the assigned
channels. Note that if the Phono inputs are not used and the sensitivity is
switched to "PHONO", the inputs shall be terminated with the supplied
termination plugs (as factory-inserted at delivery).
9.
PHONO/LINE selector switches for PHONO inputs. These switches change
the sensitivity of the PHONO inputs between PHONO (RIAA equalized) and
LINE level.
10. USB input. This allows the use of the mixer's internal soundcard by
connecting a PC to the mixer through this port and routing the audio output
signal to INPUT2 by means of the top-panel selector switch (16). Please note
that this is NOT a host interface with audio decoder, so this interface is not
intended to directly connect hard disks or USB sticks with audio content. This
connector is only designed to act as an external USB 1.1 soundcard, to be
connected to a PC. Apart from replaying audio from the PC, this interface is
bidirectional and also allows to record the signal present at the record output
(6) digitally into the PC.
16
nd
zone which needs

Publicité

loading