Declaration Of Conformity; Exemption From Liability - Flex MS713 Notice D'instruction D'origine

Declaration of Conformity

We declare under our sole responsibility
that the product described under "Technical
specifications" conforms to the following
standards or normative documents:
EN 60745 in accordance with the
regulations of the directives 2014/30/EU,
2006/42/EC, 2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
10.08.2018
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Declaration of Conformity
We as the manufacturer: FLEX
Elektrowerkzeuge GmbH,
Business address: Bahnhofstr. 15,
71711 Steinheim, Germany
declare under our sole responsibility, that
the product(s) described under „Technical
specifications" fulfills all the relevant
provisions of The Supply of Machinery
(Safety) Regulations S.I. 2008/1597 and
also fulfills all the relevant provisions of the
following UK Regulations: Electromagnetic
Compatibility Regulations S.I. 2016/1091,
The Restriction of the Use of Certain
Hazardous Substances in Electrical and
Electronic Equipment Regulations
S.I. 2012/3032 and are manufactured in
accordance with the following designated
Standards:
BS EN 62841-1:2015, BS EN 62841-2-4:2014,
BS EN 55014-1:2017, BS EN 55014-2:2015,
BS EN 61000-3-2:2014, BS EN 61000-3-3:2013
20
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli,
Technical Director – FLEX-Elektrowerk-
zeuge GmbH
Contact details for Great Britain: FLEX
Power Tools Limited, Unit 8 Anglo Office
Park, Lincoln Road, HP 12,
3RH Buckinghamshire, United Kingdom
Peter Lameli
Technical Head
19.05.2021

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profit due
to interruption in business caused by
the product or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused
by improper use of the power tool or by use
of the power tool with products from other
manufacturers.
MS713
Klaus Peter Weinper
Head of Quality
Department (QD)