Ricoh Pro 8100s Manuel page 35

3. Other Information for This Machine
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
Reduced electrical
consumption in Low
*1
Power mode
Time of switch into Low
Power mode
Time of switch out from
Low Power mode
Reduced electrical
consumption in Sleep
*1
mode
Time of switch into
Sleep mode
Time of switch out from
*1
Sleep mode
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set to a shorter time than Low Power Mode Timer
• Depending on which embedded software application is installed on it, the machine might take
longer than indicated to enter Sleep mode.
34
Type 1 Type 2
260 W 260 W
15 minutes 15 minutes
35 seconds 35 seconds
*1
1.2 W 1.2 W
60 minutes 60 minutes
360 360
seconds seconds
.
Type 3 Type 4
170 W 230 W 155 W
15 minutes 15 minutes 15 minutes
75 seconds 35 seconds 75 seconds
1.3 W 1.2 W 1.2 W
60 minutes 60 minutes 60 minutes
360 360 360
seconds seconds seconds
Type 5