ASROCK 970 Pro3 Manuel D'utilisation page 3

I/O Panel
1
13 12
1 PS/2 Mouse Port (Green)
* 2 LAN RJ-45 Port
3 Side Speaker (Gray)
4 Rear Speaker (Black)
5 Central / Bass (Orange)
6 Line In (Light Blue)
** 7 Front Speaker (Lime)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity/Link LED
Status Description
Off No Link
Blinking Data Activity
On Link
**
If you use 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack".
See the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker
2
4
6
8
To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will fi nd "Mixer" tool on your system.
Please select "Mixer ToolBox"
Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select "Realtek HDA Pri-
mary output" to use Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek HDA
Audio 2nd output" to use front panel audio.
2
11 10
8 Microphone (Pink)
9 USB 3.0 Port (USB3_0_1)
10 USB 2.0 Port (USB_4_5)
11 USB 2.0 Port (USB_2_3)
12 USB 2.0 Port (USB_0_1)
13 PS/2 Keyboard Port (Purple)
SPEED LED
Status Description
Off 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
(No. 7) (No. 4)
V --
V V
V V
V V
, click "Enable playback multi-streaming", and click "ok".
ASRock 970 Pro3 Motherboard
3 6
4 7
5 8
9
ACT/LINK SPEED
LED LED
LAN Port
Central / Bass Side Speaker
(No. 5) (No. 3)
-- --
-- --
V --
V V
3