Publicité
MALONE
Open and pair the mounting bracket hardware as pictured.
We begin by assembling the mounting brackets to the vehicles cross
bars as shown, leaving the outside mounting bracket loose.
Aline the hole in the base of the carrier to the stud of the secured mounting bracket.
You'll now need to adjust the outside bracket to capture the other mounting hole in the base of the
carrier.
Align and remove the carrier.
Now, fully secure the
mounting brackets to
vehicles cross bar in
desired location.
!
Always keep ski/board
carriers closed and locked
to deter theft.
Warnings / Limitations: It is important that the roof system and accessories are properly and securely attached to the vehicle,
according to instructions and only used for its predetermined purpose - per instruction manual. Periodic inspections for wear
and tear of the roof system and accessories are paramount. It is the users' responsibility to fully understand the instruction
manual prior to installation. Precautions are to be taken during installation, understanding limitations of the roof system
. Do not continue to use the product if excessive corrosion, deformity or any mechanical defect is detected.
. Check local and state laws governing projection of objects beyond the perimeter of the vehicle.
. Obey all posed speed limits and traffic cautions. Adapt your driving for the load being transported.
. Do not use Malone carriers for purposes other than what they were designed for.
. Not for use on trailers or any other modes of transport other than vehicle rooftop transport.
. Failure to follow these guidelines will void the warranty.
. Remove the product before entering a carwash.
and prevention of possible damage to vehicle, property and/or bodily injury.
1
MPG605 LiftLine
tm
R
Publicité
